AIMS 2000 Watt Pure Sine Inverter Charger PICOGLF20W12V120V PICOGLF20W12V120V

AIMS 2000 Watt Pure Sine Inverter Charger

The AIMS Power 2000 Watt Pure Sine Low Frequency Inverter has a built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. From off-grid home or business back up power systems to campsites, tailgating parties or solar systems. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat.

This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. This inverter charger is capable of a 6000 watt surge for 20 seconds and can run at 2000 watts continuously. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power.

The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep" and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.

Features:

• 2000 watt low frequency inverter
• 6000 watt surge for 20 seconds -3x surge capability
• Battery Priority Selector
• Terminal Block
• GFCI - 15 amps
• Marine Coated and Protected
• Multi Stage Smart charger 70 Amp
• Remote panel available
• Auto gen start
• Auto frequency
• 10msec typical transfer time
• 7 battery type settings for charger
• Sselectable 25W power save mode (hibernation)
• ETL Listed to UL 458 Standards and CSA 22.2 No 107.1


Output Specifications:

• Continuous Output Power: 2000 Watts
• Surge Rating: 6000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Output Voltage: 100-110-120Vac
• Nominal Efficiency: >92% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• Bypass terminal breaker-30 amps
• THD: < 10% DC


Input Specifications

• Nominal Input Voltage: 12.0Vdc
• Minimum Start Voltage: 10.0Vdc
• Low Battery Alarm: 10.5Vdc-11.0Vdc
• Low battery Trip: 10.0Vdc-10.5Vdc
• High Voltage Alarm: 16.0Vdc
• Low battery Voltage Restart: 13.0Vdc
• Idle Consumption: 28 watts
• Charger breaker-20 amps
• Power Saver Mode Idle Consumption: <12.7 watts


Charger Specifications

• Output voltage: Depends on battery type
• Charger Rate: 70A


Dimensions:

• Unit Size L x W x H: 15.35"x 11"x 7"
• Shipping L x W x H: 20.5"X 13.8"X 12.2"
• Unit Weight: 47.4 lbs.
• Shipping Weight: 55 lbs.