Turning Inserts, Relief Angle: 7 , Corner Radius (Decimal Inch): 0.0315 , Included Angle: 35.0 , Manufacturer Grade: H210T , Coating/Finish: Uncoated MPN:70282644
Turning Inserts, Relief Angle: 7 , Corner Radius (Decimal Inch): 0.0315 , Included Angle: 35.0 , Manufacturer Grade: H210T , Coating/Finish: Uncoated MPN:70282644 is available to buy in increments of 10
Turning Inserts; Relief Angle: 7 ; Corner Radius (Decimal Inch): 0.0315 ; Included Angle: 35.0 ; Manufacturer Grade: H210T ; Coating/Finish: Uncoated ; Wiper Edge: No
- Turning Inserts
- Relief Angle: 7
- Corner Radius (Decimal Inch): 0.0315
- Included Angle: 35.0
- Manufacturer Grade: H210T
- Coating/Finish: Uncoated
- Wiper Edge: No
Product Information
- : 70282644
- Ansi Code: VCGT332FN25PH210T
- Chip Breaker: 25P
- Clearance Code: C
- Coating Process: Uncoated
- Coating/Finish: Uncoated
- Corner Radius (Decimal Inch): 0.0315
- Hole Diameter (Decimal Inch): 0.1732
- Included Angle: 35.0
- Inscribed Circle (Decimal Inch): 0.3748
- Insert Hand: Neutral
- Insert Holding Method: Screw
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: V
- Insert Size Code: 332
- Insert Style: VCGT
- Insert Thickness (Decimal Inch): 0.1874
- Iso Code: VCGT 160408FN-25P H210T
- Manufacturer Grade: H210T
- Maximum Depth of Cut (Decimal Inch): 0.6535
- Number of Cutting Edges: 2
- Primary Workpiece Material: Non-Ferrous Metal; Super-alloys & Titanium
- Primary Workpiece Material Code: N; S
- Rake: Positive
- Relief Angle: 7
- Secondary Workpiece Material: Cast Iron
- Secondary Workpiece Material Code: K
- Series: VCGT
- Tolerance Code: G
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.02
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 1:00pm UTC
Category: Turning and Profiling Inserts