Turning Inserts, Insert Style: VCGT , Insert Size Code: 220 , Insert Shape: Diamond , Included Angle: 35.0 , Inscribed Circle (Decimal Inch): 0.2500 MPN:70277892
Turning Inserts, Insert Style: VCGT , Insert Size Code: 220 , Insert Shape: Diamond , Included Angle: 35.0 , Inscribed Circle (Decimal Inch): 0.2500 MPN:70277892 is available to buy in increments of 10
Turning Inserts; Insert Style: VCGT ; Insert Size Code: 220 ; Insert Shape: Diamond ; Included Angle: 35.0 ; Inscribed Circle (Decimal Inch): 0.2500 ; Corner Radius (Decimal Inch): 0.0039
- Turning Inserts
- Insert Style: VCGT
- Insert Size Code: 220
- Insert Shape: Diamond
- Included Angle: 35.0
- Inscribed Circle (Decimal Inch): 0.2500
- Corner Radius (Decimal Inch): 0.0039
Product Information
- : 70277892
- Ansi Code: VCGT220ENSFTCM10
- Chip Breaker: SF
- Clearance Code: C
- Coating Process: Uncoated
- Coating/Finish: Uncoated
- Corner Radius (Decimal Inch): 0.0039
- Hole Diameter (Decimal Inch): 0.1142
- Included Angle: 35.0
- Inscribed Circle (Decimal Inch): 0.2500
- Inscribed Circle (Inch): 1/4
- Insert Hand: Neutral
- Insert Holding Method: Screw
- Insert Material: Cermet
- Insert Shape: Diamond
- Insert Shape Code: V
- Insert Size Code: 220
- Insert Style: VCGT
- Insert Thickness (Decimal Inch): 0.1252
- Iso Code: VCGT 110301EN-SF TCM10
- Manufacturer Grade: TCM10
- Maximum Depth of Cut (Decimal Inch): 0.4370
- Number of Cutting Edges: 2
- Primary Workpiece Material: Stainless Steel; Steel
- Primary Workpiece Material Code: M; P
- Rake: Positive
- Relief Angle: 7
- Secondary Workpiece Material: Cast Iron
- Secondary Workpiece Material Code: K
- Series: VCGT
- Tolerance Code: G
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.01
- Prohibited States: AK,HI,PR
Product info last updated on July 16, 2024 12:02pm UTC
Category: Turning and Profiling Inserts