Turning Inserts, Insert Style: CNMM , Insert Size Code: 646 , Insert Shape: Diamond , Included Angle: 80.0 , Inscribed Circle (Decimal Inch): 0.7500 MPN:76115360
Turning Inserts, Insert Style: CNMM , Insert Size Code: 646 , Insert Shape: Diamond , Included Angle: 80.0 , Inscribed Circle (Decimal Inch): 0.7500 MPN:76115360 is available to buy in increments of 10
Turning Inserts; Insert Style: CNMM ; Insert Size Code: 646 ; Insert Shape: Diamond ; Included Angle: 80.0 ; Inscribed Circle (Decimal Inch): 0.7500 ; Corner Radius (Decimal Inch): 0.0945
- Turning Inserts
- Insert Style: CNMM
- Insert Size Code: 646
- Insert Shape: Diamond
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.7500
- Corner Radius (Decimal Inch): 0.0945
Product Information
- : 76115360
- Ansi Code: CNMM646ENR58CTCP115
- Chip Breaker: R58
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; Al2O3
- Corner Radius (Decimal Inch): 0.0945
- Hole Diameter (Decimal Inch): 0.3126
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.7500
- Inscribed Circle (Inch): 3/4
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: C
- Insert Size Code: 646
- Insert Style: CNMM
- Insert Thickness (Decimal Inch): 0.2500
- Insert Thickness (Inch): 1/4
- Iso Code: CNMM 190624EN-R58 CTCP115
- Manufacturer Grade: CTCP115
- Maximum Depth of Cut (Decimal Inch): 0.7598
- Number of Cutting Edges: 4
- Primary Workpiece Material: Cast Iron; Steel
- Primary Workpiece Material Code: K; P
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Stainless Steel
- Secondary Workpiece Material Code: M
- Series: CNMM
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.06
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 1:00pm UTC
Category: Turning and Profiling Inserts