Turning Inserts, Relief Angle: 0 , Corner Radius (Decimal Inch): 0.0315 , Included Angle: 80.0 , Manufacturer Grade: CTPM125 , Coating/Finish: TiAlTaN MPN:75011230
Turning Inserts, Relief Angle: 0 , Corner Radius (Decimal Inch): 0.0315 , Included Angle: 80.0 , Manufacturer Grade: CTPM125 , Coating/Finish: TiAlTaN MPN:75011230 is available to buy in increments of 10
Turning Inserts; Relief Angle: 0 ; Corner Radius (Decimal Inch): 0.0315 ; Included Angle: 80.0 ; Manufacturer Grade: CTPM125 ; Coating/Finish: TiAlTaN ; Wiper Edge: No
- Turning Inserts
- Relief Angle: 0
- Corner Radius (Decimal Inch): 0.0315
- Included Angle: 80.0
- Manufacturer Grade: CTPM125
- Coating/Finish: TiAlTaN
- Wiper Edge: No
Product Information
- : 75011230
- Ansi Code: CNMG432ENM30CTPM125
- Chip Breaker: M30
- Clearance Code: N
- Coating Process: PVD
- Coating/Finish: TiAlTaN
- Corner Radius (Decimal Inch): 0.0315
- Hole Diameter (Decimal Inch): 0.2031
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: C
- Insert Size Code: 432
- Insert Style: CNMG
- Insert Thickness (Decimal Inch): 0.1874
- Iso Code: CNMG 120408EN-M30 CTPM125
- Manufacturer Grade: CTPM125
- Maximum Depth of Cut (Decimal Inch): 0.5079
- Number of Cutting Edges: 4
- Primary Workpiece Material: Stainless Steel; Steel
- Primary Workpiece Material Code: M; P
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Super-alloys & Titanium
- Secondary Workpiece Material Code: S
- Series: CNMG
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.02
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 5:58am UTC
Category: Turning and Profiling Inserts