Turning Inserts, Insert Style: SNMM , Insert Size Code: 543 , Insert Shape: Square , Included Angle: 90.0 , Inscribed Circle (Decimal Inch): 0.6248 MPN:76129532
Turning Inserts, Insert Style: SNMM , Insert Size Code: 543 , Insert Shape: Square , Included Angle: 90.0 , Inscribed Circle (Decimal Inch): 0.6248 MPN:76129532 is available to buy in increments of 10
Turning Inserts; Insert Style: SNMM ; Insert Size Code: 543 ; Insert Shape: Square ; Included Angle: 90.0 ; Inscribed Circle (Decimal Inch): 0.6248 ; Corner Radius (Decimal Inch): 0.0472
- Turning Inserts
- Insert Style: SNMM
- Insert Size Code: 543
- Insert Shape: Square
- Included Angle: 90.0
- Inscribed Circle (Decimal Inch): 0.6248
- Corner Radius (Decimal Inch): 0.0472
Product Information
- : 76129532
- Ansi Code: SNMM543ENR58CTCP125
- Chip Breaker: R58
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; Al2O3
- Corner Radius (Decimal Inch): 0.0472
- Hole Diameter (Decimal Inch): 0.2500
- Included Angle: 90.0
- Inscribed Circle (Decimal Inch): 0.6248
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Solid Carbide
- Insert Shape: Square
- Insert Shape Code: S
- Insert Size Code: 543
- Insert Style: SNMM
- Insert Thickness (Decimal Inch): 0.2500
- Insert Thickness (Inch): 1/4
- Iso Code: SNMM 150612EN-R58 CTCP125
- Manufacturer Grade: CTCP125
- Maximum Depth of Cut (Decimal Inch): 0.6248
- Number of Cutting Edges: 8
- Primary Workpiece Material: Cast Iron; Steel
- Primary Workpiece Material Code: K; P
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Stainless Steel
- Secondary Workpiece Material Code: M
- Series: SNMM
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.04
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 1:00pm UTC
Category: Turning and Profiling Inserts