Turning Inserts, Insert Style: WNMG , Insert Size Code: 431 , Insert Shape: Trigon , Included Angle: 80.0 , Inscribed Circle (Decimal Inch): 0.5000 MPN:76139316
Turning Inserts, Insert Style: WNMG , Insert Size Code: 431 , Insert Shape: Trigon , Included Angle: 80.0 , Inscribed Circle (Decimal Inch): 0.5000 MPN:76139316 is available to buy in increments of 10
Turning Inserts; Insert Style: WNMG ; Insert Size Code: 431 ; Insert Shape: Trigon ; Included Angle: 80.0 ; Inscribed Circle (Decimal Inch): 0.5000 ; Corner Radius (Decimal Inch): 0.0157
- Turning Inserts
- Insert Style: WNMG
- Insert Size Code: 431
- Insert Shape: Trigon
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.5000
- Corner Radius (Decimal Inch): 0.0157
Product Information
- : 76139316
- Ansi Code: WNMG431ENM50CTCP115
- Chip Breaker: M50
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; Al2O3
- Corner Radius (Decimal Inch): 0.0157
- Hole Diameter (Decimal Inch): 0.2031
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Solid Carbide
- Insert Shape: Trigon
- Insert Shape Code: W
- Insert Size Code: 431
- Insert Style: WNMG
- Insert Thickness (Decimal Inch): 0.1874
- Iso Code: WNMG 080404EN-M50 CTCP115
- Manufacturer Grade: CTCP115
- Maximum Depth of Cut (Decimal Inch): 0.3386
- Number of Cutting Edges: 6
- Primary Workpiece Material: Cast Iron; Steel
- Primary Workpiece Material Code: K; P
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Stainless Steel
- Secondary Workpiece Material Code: M
- Series: WNMG
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.02
- Prohibited States: AK,HI,PR
Product info last updated on July 16, 2024 12:02pm UTC
Category: Turning and Profiling Inserts