Turning Inserts, Insert Style: TNMA , Insert Size Code: 433 , Insert Shape: Triangle , Included Angle: 60.0 , Inscribed Circle (Decimal Inch): 0.5000 MPN:70134532
Turning Inserts, Insert Style: TNMA , Insert Size Code: 433 , Insert Shape: Triangle , Included Angle: 60.0 , Inscribed Circle (Decimal Inch): 0.5000 MPN:70134532 is available to buy in increments of 10
Turning Inserts; Insert Style: TNMA ; Insert Size Code: 433 ; Insert Shape: Triangle ; Included Angle: 60.0 ; Inscribed Circle (Decimal Inch): 0.5000 ; Corner Radius (Decimal Inch): 0.0472
- Turning Inserts
- Insert Style: TNMA
- Insert Size Code: 433
- Insert Shape: Triangle
- Included Angle: 60.0
- Inscribed Circle (Decimal Inch): 0.5000
- Corner Radius (Decimal Inch): 0.0472
Product Information
- : 70134532
- Ansi Code: TNMA433ENCTCK120
- Chip Breaker: A
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; Al2O3
- Corner Radius (Decimal Inch): 0.0472
- Hole Diameter (Decimal Inch): 0.2031
- Included Angle: 60.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Solid Carbide
- Insert Shape: Triangle
- Insert Shape Code: T
- Insert Size Code: 433
- Insert Style: TNMA
- Insert Thickness (Decimal Inch): 0.1874
- Iso Code: TNMA 220412EN CTCK120
- Manufacturer Grade: CTCK120
- Maximum Depth of Cut (Decimal Inch): 0.8661
- Number of Cutting Edges: 6
- Primary Workpiece Material: Cast Iron
- Primary Workpiece Material Code: K
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Steel
- Secondary Workpiece Material Code: P
- Series: TNMA
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.03
- Prohibited States: AK,HI,PR
Product info last updated on July 16, 2024 12:02pm UTC
Category: Turning and Profiling Inserts