Turning Inserts, Relief Angle: 0 , Corner Radius (Decimal Inch): 0.0157 , Included Angle: 55.0 , Manufacturer Grade: CTEP110 , Coating/Finish: TiCN, Al2O3 MPN:76102004
Turning Inserts, Relief Angle: 0 , Corner Radius (Decimal Inch): 0.0157 , Included Angle: 55.0 , Manufacturer Grade: CTEP110 , Coating/Finish: TiCN, Al2O3 MPN:76102004 is available to buy in increments of 10
Turning Inserts; Relief Angle: 0 ; Corner Radius (Decimal Inch): 0.0157 ; Included Angle: 55.0 ; Manufacturer Grade: CTEP110 ; Coating/Finish: TiCN; Al2O3 ; Wiper Edge: No
- Turning Inserts
- Relief Angle: 0
- Corner Radius (Decimal Inch): 0.0157
- Included Angle: 55.0
- Manufacturer Grade: CTEP110
- Coating/Finish: TiCN
- Al2O3
- Wiper Edge: No
Product Information
- : 76102004
- Ansi Code: DNMG331ENCF20CTEP110
- Chip Breaker: CF20
- Clearance Code: N
- Coating Process: PVD
- Coating/Finish: TiCN; Al2O3
- Corner Radius (Decimal Inch): 0.0157
- Hole Diameter (Decimal Inch): 0.1500
- Included Angle: 55.0
- Inscribed Circle (Decimal Inch): 0.3748
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Cermet
- Insert Shape: Diamond
- Insert Shape Code: D
- Insert Size Code: 331
- Insert Style: DNMG
- Insert Thickness (Decimal Inch): 0.1874
- Iso Code: DNMG 110404EN-CF20 CTEP110
- Manufacturer Grade: CTEP110
- Maximum Depth of Cut (Decimal Inch): 0.4567
- Number of Cutting Edges: 4
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Cast Iron; Super-alloys & Titanium
- Secondary Workpiece Material Code: K; S
- Series: DNMG
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.01
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 1:00pm UTC
Category: Turning and Profiling Inserts