Turning Inserts, Insert Style: SNMG , Insert Size Code: 431 , Insert Shape: Square , Included Angle: 90.0 , Inscribed Circle (Decimal Inch): 0.5000 MPN:76140716
Turning Inserts, Insert Style: SNMG , Insert Size Code: 431 , Insert Shape: Square , Included Angle: 90.0 , Inscribed Circle (Decimal Inch): 0.5000 MPN:76140716 is available to buy in increments of 10
Turning Inserts; Insert Style: SNMG ; Insert Size Code: 431 ; Insert Shape: Square ; Included Angle: 90.0 ; Inscribed Circle (Decimal Inch): 0.5000 ; Corner Radius (Decimal Inch): 0.0157
- Turning Inserts
- Insert Style: SNMG
- Insert Size Code: 431
- Insert Shape: Square
- Included Angle: 90.0
- Inscribed Circle (Decimal Inch): 0.5000
- Corner Radius (Decimal Inch): 0.0157
Product Information
- : 76140716
- Ansi Code: SNMG431ENF50CTCP135
- Chip Breaker: F50
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; Al2O3
- Corner Radius (Decimal Inch): 0.0157
- Hole Diameter (Decimal Inch): 0.2031
- Included Angle: 90.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Solid Carbide
- Insert Shape: Square
- Insert Shape Code: S
- Insert Size Code: 431
- Insert Style: SNMG
- Insert Thickness (Decimal Inch): 0.1874
- Iso Code: SNMG 120404EN-F50 CTCP135
- Manufacturer Grade: CTCP135
- Maximum Depth of Cut (Decimal Inch): 0.5000
- Number of Cutting Edges: 8
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Rake: Negative
- Relief Angle: 0
- Secondary Workpiece Material: Cast Iron; Stainless Steel
- Secondary Workpiece Material Code: K; M
- Series: SNMG
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 6.00
- Package Width: 6.00
- Package Height: 6.00
- Package Weight: 0.02
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 1:00pm UTC
Category: Turning and Profiling Inserts