21-7/8" x 120" Engine Lathe: Frequency, 15 hp, 230 V MPN:V550/120-EW
21-7/8" x 120" Engine Lathe: Frequency, 15 hp, 230 V
21-7/8" x 120" Engine Lathe: Frequency, 15 hp, 230 V 3 Phase, 90 mm Spindle Bore Dia, 18 to 1,800 RPM
Product Information
- : V550/120-EW
- Bed Width: 400mm; 15.748in
- Bed Width (Inch): 15.7480
- Cross Slide Travel: 301.63mm; 11.875in
- Cross Slide Travel (Decimal Inch): 11.8750
- Cross Slide Travel (Inch): 11-7/8
- Distance Between Centers: 120in
- Distance Between Centers (Inch): 120
- Gap Length: 215.9mm; 8.5in
- Gap Length (Decimal Inch): 8.5000
- Max. Cross Feed Rate Per Revolution (Decimal Inch): 0.0550
- Max. Longitudinal Feed Per Rev. (Decimal Inch): 0.1100
- Maximum Cross Feed Rate Per Revolution: 1.4mm; 0.055in
- Maximum Longitudinal Feed Per Revolution: 2.79mm; 0.11in
- Maximum Spindle Speed: 1800
- Maximum Threads Per Inch: 84
- Min. Cross Feed Rate Per Revolution (Decimal Inch): 0.000800
- Min. Longitudinal Feed Per Rev. (Decimal Inch): 0.0016
- Minimum Cross Feed Rate Per Revolution: 0.0008in
- Minimum Metric Pitch: 0.0079in
- Minimum Metric Pitch (Decimal Inch): 0.0079
- Minimum Spindle Speed: 18
- Number of Inch Threads: 79
- Overall Depth: 67in
- Overall Depth (Inch): 67
- Overall Height: 81in
- Overall Length (Inch): 187
- Phase: Three
- Spindle Bore Diameter: 90mm
- Spindle Nose Designation: D1-11
- Spindle Speed Control: Frequency
- Spindle Taper Size: 5MT
- Swing (Inch): 21-7/8
- Swing Over Cross Slide (Decimal Inch): 14.5000
- Swing Over Cross Slide (Inch): 14-1/2
- Swing Over Gap: 831.85mm; 32.75in
- Swing Over Gap (Decimal Inch): 32.7500
- Swing Over Gap (Inch): 32-3/4
- Tailstock Taper Size: 6MT
- Tailstock Travel: 177.8mm; 7in
- Tailstock Travel (Decimal Inch): 7.0000
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242300
- CA Restricted (Prop 65): Unknown
- Package Weight: 7960.00
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 2:26am UTC
Category: Bench, Engine and Toolroom Lathes