Alu 35.4 Dia 36.5 H Roof Fan w.Motor MPN:7A633
Alu 35.4 Dia 36.5 H Roof Fan w.Motor
The Alu 35.4 Dia 36.5 H Roof Fan w.Motor from Dayton is perfect for exhausting contaminated air from kitchen range hoods in restaurants, schools, and commercial or industrial settings. This centrifugal belt-drive upblast ventilator effectively removes odors, smoke, grease, and heat to create a healthier and more comfortable environment for workers and customers alike. With its sturdy construction and leakproof seals, this fan is ideal for both indoor and outdoor installations and offers superior stability during transportation and installation. The isolated motor compartment ensures that the contaminated air stream does not enter the motor, while outside air is pulled in through an oversized breather tube to cool it down effectively. This versatile and durable fan comes with a powerful motor to provide maximum performance and meets the highest safety standards for quiet operation and longevity.
Top product features:
- Centrifugal Belt-Drive: Ensures smooth operation and provides maximum efficiency for exhausting contaminated air from kitchen range hoods up and away from the roof.
- Fully Welded Windband: Creates a leakproof seal between the ventilator and the mounting surface, preventing any air leakage that may affect performance or energy efficiency.
- Independent Neoprene Studs: Isolate motor, drive frame, and wheel from metal-to-metal contact, greatly reducing overall noise levels for a quieter operation that will not disturb workers or customers in nearby areas.
Top product applications:
- Exhausting contaminated air from kitchen range hoods in restaurants and commercial kitchens.
- Ventilating indoor air to prevent the buildup of heat, smoke, and other airborne particles that may affect air quality and create a health risk for occupants.
- Removing odors from industrial facilities such as chemical plants, refineries, or manufacturing plants where strong smells are produced during production processes.
This centrifugal belt-drive upblast ventilator is designed for use in restaurants, schools, and commercial and industrial applications to exhaust contaminated air from kitchen range hoods up and away from the roof. Its 1-pc. rolled aluminum windband is fully welded to the base to create a virtually leakproof seal between the ventilator and the mounting surface. Internal steel support braces and a fully rolled windband dramatically increase the rigidity of the ventilator for greater stability during transport and installation. Motor, drive frame, and wheel are isolated from the mounting base by independent neoprene studs no metal-to-metal contact, greatly reducing overall noise. The motor compartment is isolated from the contaminated air stream and is cooled by outside air that is pulled in through an oversized breather tube by the spinning action of the wheel.
Technical Specifications
- Item Upblast Ventilator
- Drive Type - Roof Ventilators Belt Drive
- Drive Package With Motor Included Yes
- Base Size - Roof Ventilators 30 in x 30 in
- Duty Rating - Roof Ventilators Standard
- Voltage - Roof Ventilators 115 V AC/208 V AC/230 V AC
- Motor HP - Roof Ventilators 1/2
- Mounting Location - Roof Ventilators Roof
- Number of Speeds 1
- Wheel Dia. 21 1/4 in
- Item - Roof Ventilators Upblast Ventilator
- CFM @ 0.000-In. SP 4275
- CFM @ 0.125-In. SP 3994
- CFM @ 0.250-In. SP 3718
- CFM @ 0.375-In. SP 3413
- CFM @ 0.500-In. SP 3048
- CFM @ 0.625-In. SP 2518
- Sones @ 0.125-In. SP @ 5 Ft. 11.7
- Sones @ 0.250-In. SP @ 5 Ft. 10.9
- Sones @ 0.500-In. SP @ 5 Ft. 9.4
- Assembled/Unassembled Unassembled
- Phase 1
- Hz 60
- Max. BHP 0.52
- RPM 760
- Base Height 1-3/4 in
- Overall Dia. 35-3/8 in
- Shaft Dia. Wheel End 3/4 in
- Bearing Type Regreasable Pillow Block
- Overall Height 36 1/2 in
- Max. Inlet Temp. 300 Degrees
- Housing Material Spun Aluminum
- Wheel Material Aluminum
- Speed Controllable No
- Fixed UL 762 Kitchen Roof Curb Stock No. 4HX57
- Recommended 12 In. Fixed Curb Item No. 2RB79
- Recommended 8 In. Fixed Curb Item No. 4HX41
- Recommended Damper Size (In.) 23 x 23
- Recommended Damper Stock No. 4HX67
- Adj. 12 3/8"H Roof Curb Stock No. 2ZV83
- Adj. UL 762 Kitchen Roof Curb Stock No. 4HX62
- Requires Roof Curb For New Installation
- Includes NEMA 1 Junction Box, Drive Package
- Standards UL/cUL 762, AMCA Sound and Air
- Dimension A 30 in
- Dimension B 35-3/8 in
- Dimension C 34-3/4 in
- Dimension D 21 in
Manufacturer Details
- Manufacturer: Dayton
- Condensed Mfg Number: 7A633
- MPN: 7A633
Label Details
- Hazardous Material: N
- Green Material Flag: N
- Country of Origin: ZZ
- CA Prop 65 Wht Label: N
Classification Details
- Harmonization Code: 8414599080
- GDS Category Name: Centrifugal Upblast Roof Exhaust Fans with Motor
- GDS Family Name: Roof Ventilators
- GDS Segment Name: HVAC and Refrigeration
- UNSPSC: 40101502
- UNSPSC Class ID: 15
- UNSPSC Commodity Name: Ventilation
- UNSPSC Commodity ID: 02
- UNSPSC Commodity Name: Air exhausters
- UNSPSC Family ID: 10
- UNSPSC Family Name: Heating and ventilation and air circulation
- UNSPSC Segment ID: 40
- UNSPSC Segment Name: Distribution and Conditioning Systems and Equipment and Components
Shipping Details
- Not For Sale In: HI AK PR
Related ASINs: B07J6G42TD, B07HLTV5MT, B007IBEXXY
Product info last updated on October 25, 2023 10:38am UTC Category: Roof Ventilators