Mill Drill Machines, Spindle Speed Control: Geared Head, Drilling Capacity In Steel: 45.0 mm, 1.5620 in, Swing Distance (Inch): 20, Phase: 1 MPN:405-0593C
Mill Drill Machines; Spindle Speed Control: Geared Head; Drilling Capacity In Steel: 45.0 mm; 1.5620 in; Swing Distance (Inch): 20; Phase: 1; Table Length (Inch): 31-1/2; Left-hand Head Tilt: 90.0 0; Right-hand Head Tilt: 90.0 0; Table Width (Inch): 9-1/2
- Mill Drill Machines
- Spindle Speed Control: Geared Head
- Drilling Capacity In Steel: 45.0 mm
- 1.5620 in
- Swing Distance (Inch): 20
- Phase: 1
- Table Length (Inch): 31-1/2
- Left-hand Head Tilt: 90.0 0
- Right-hand Head Tilt: 90.0 0
- Table Width (Inch): 9-1/2
Product Information
- : 405-0593C
- Column Type: Square
- Cross Travel (Inch): 7-1/2
- Drilling Capacity in Cast Iron (Inch): 1-3/4
- Drilling Capacity in Steel (Inch): 1.5620
- Includes: AL-500D Power Feed ( 41046715);Acu-Rite VUE DRO ( 73955387);Interstate Angle Vise ( 09193053);Stand ( 09519919)
- Left-Hand Head Tilt (Degrees): 90.00
- Longitudinal Travel (Inch): 22
- Machine Type: Mill Drill Combination
- Maximum Spindle Speed: 1970.00RPM
- Maximum Spindle to Table Distance (Inch): 17.7180
- Minimum Spindle Speed: 120.00RPM
- Number of Spindle Speeds: 6
- Overall Depth (Inch): 31-1/2
- Overall Height (Inch): 73-1/4
- Overall Length (Decimal Inch): 29.5000
- Phase: Single
- Power Down Feed: No
- Right-Hand Head Tilt (Degrees): 90.00
- Spindle Speed Control: Geared Head
- Spindle Taper Size: R8
- Spindle Travel Length (Inch): 4-3/4
- Swing Distance (Inch): 20
- Voltage: 220 V
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23241500
- CA Restricted (Prop 65): Unknown
- Package Length: 31.50
- Package Width: 29.50
- Package Height: 73.25
- Package Weight: 767.00
- Prohibited States: AK,HI,PR
Product info last updated on November 15, 2024 5:30am UTC
Category: Combination Milling Machines