IKO Roller Follower- Full Comp- Inch CRY12VUU Double Sealed 3/4" OD CRY12VUU
IKO Roller Follower- Full Comp- Inch CRY12VUU Double Sealed 3/4"" OD CRY12VUU
IKO Roller Follower- Full Comp- Inch, CRY12VUU, Double Sealed, 3/4" OD
IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.
IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.
Product Specifications
- BRANDIKO
- BEARING STYLECylindrical OD
- DYNAMIC LOAD RATING (N)8710
- STATIC LOAD RATING (N)12300
- MANUFACTURER PART NUMBERCRY12VUU
- OD MM (INCH)19.050 (3/4)
- OVERALL WIDTH MM (INCH)14.288 (.5625)
- BORE DIAMETER MILLIMETERS (INCH)6.350 (1/4)
- RADIAL CLEARANCE0.035 to 0.060
- SIDE PLATE OD (A) MM (INCH)14.4 (.567)
- OUTER RING CORNER RADIUS MIN. MM (INCH)0.794 (1/32)
- TOLERANCE OUTER RING WIDTH (MM)+0 / -0.130
- TOLERANCE OVERALL WIDTH (MM)+0.130 / -0.250
- OUTER RING WIDTH MM (INCH)12.700 (1/2)
- SHAFT DIA DRIVE FIT (MM)6.348 to 6.358
- SHAFT DIA PRESS FIT (MM)6.353 to 6.363
- SHAFT DIA PUSH FIT (MM)6.332 to 6.342
- PREPACKED GREASEYES
- TRACK CAPACITY (N)4490
- CROWN RADIUS (R) mm (inch)--
- NEEDLE CONSTRUCTIONFull Compliment
- RETAINERNone
- OIL HOLE & GROOVEAt inner ring
- SERIESCRY
- TYPEDouble Sealed
- DESCRIPTIONRoller Follower - Full Compliment - Inch Series
- O.D. TOLERANCE (mm)+0 / -0.025
- BORE TOLERANCE (mm)+0.005 / -0.010
Additional Information
- UNSPSC: 26101708
- Brand: IKO International
- Material: Full Compliment
- Package Quantity: 1
- Country of Origin: JP
- FOB Origin: NJ
- Ships by: PARCEL
- Comes in a kit: No
- Newly added to catalog: No
- Item is on Clearance: No
- Contains Hazardous Materials: No
- CA Proposition 65 Applies: Yes
- Package Length: 0.03
- Package Width: 0.03
- Package Height: 0.03
- Package Weight: 0.06
Product info last updated on May 28, 2024 1:50pm UTC
Category: Bearings