IKO Roller Follower- Full Comp- Inch, CRY48VUU, Double Sealed, 3" OD
IKO Non-separable Yoke Type Roller Follower is full complement bearing with inner ring, side plates and thick-walled outer ring to withstand heavy rolling or shock loads. Its surface is treated with black oxide coating. Roller Followers are available with Crowned or Cylindrical outer rings. The crowned outer ring relieves edge load created by mounting error and the cylindrical is suitable for applications with large loads or low track surface hardness due to a large contact area with mating track surface. Sufficient lubrication is needed between roller followers and steel track on which cam followers run, to prevent seizure and to reduce friction.
Product Specifications
BRANDIKO
BEARING STYLECylindrical OD
DYNAMIC LOAD RATING (N)77600
STATIC LOAD RATING (N)172000
MANUFACTURER PART NUMBERCRY48VUU
OD MM (INCH)76.200 (3)
OVERALL WIDTH MM (INCH)46.038 (1.8125)
BORE DIAMETER MILLIMETERS (INCH)25.400 (1)
RADIAL CLEARANCE0.035 to 0.060
SIDE PLATE OD (A) MM (INCH)54.0 (2.125)
OUTER RING CORNER RADIUS MIN. MM (INCH)2.381 (3/32)
TOLERANCE OUTER RING WIDTH (MM)+0 / -0.130
TOLERANCE OVERALL WIDTH (MM)+0.130 / -0.250
OUTER RING WIDTH MM (INCH)44.450 (1-3/4)
SHAFT DIA DRIVE FIT (MM)25.397 to 25.410
SHAFT DIA PRESS FIT (MM)25.408 to 25.420
SHAFT DIA PUSH FIT (MM)25.377 to 25.390
PREPACKED GREASEYES
TRACK CAPACITY (N)64300
CROWN RADIUS (R) mm (inch)--
NEEDLE CONSTRUCTIONFull Compliment
RETAINERNone
OIL HOLE & GROOVEAt inner ring
SERIESCRY
TYPEDouble Sealed
DESCRIPTIONRoller Follower - Full Compliment - Inch Series