Milling Insert: SEKN 1203AFFN, IC20, Solid Carbide MPN:5600135
Milling Insert: SEKN 1203AFFN, IC20, Solid Carbide MPN:5600135 is available to buy in increments of 10
Milling Insert: SEKN 1203AFFN, IC20, Solid Carbide
Milling Insert: SEKN 1203AFFN, IC20, Solid Carbide Uncoated, 1/8" Thick, 1/2" Wide
Product Information
- : 5600135
- Ansi Code: SEK 42AFFN IC20
- Chip Breaker: Flat Top
- Coating Classification: Uncoated
- Coating Process: Uncoated
- Coating/Finish: Uncoated
- Corner Radius (Decimal Inch): 0.0000
- Cutter Series Compatibility: F45E
- Cutting Direction: Neutral
- Cutting Edge Effective Length (Decimal Inch): 0.5000
- Cutting Edge Style: Sharp
- Included Angle Degree: 90
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Inscribed Circle Range (Decimal Inch): 0.5000 to 0.5100
- Insert Hand: Neutral
- Insert Holding Method: Clamp
- Insert Material: Carbide
- Insert Shape: Square
- Insert Size: 4
- Insert Size Code: 42
- Insert Style: SEK
- Iso Code: SEKN 1203AFFN
- Length (Decimal Inch - 4 Decimals): 0.5000
- Length (Inch): 1/2
- Length Range (Decimal Inch): 0.5000 to 0.6000
- Manufacturer Grade: IC20
- Manufacturers Catalog Number: False
- Material Application: Stainless Steel; Cast Iron; Non-Ferrous Metal; Superalloys & Titanium; Hard Material
- Maximum Depth of Cut (Decimal Inch): 0.2560
- Maximum Depth of Cut (mm): 6.50
- Multi-Use Tool: Yes
- Number of Cutting Edges: 4
- Primary Workpiece Material: Stainless Steel; Cast Iron; Non-Ferrous Metal; Superalloys & Titanium; Hard Material
- Primary Workpiece Material Code: M; K; N; S; H
- Rake: Positive
- Relief Angle: 20
- Secondary Workpiece Material Code: H; N; S
- Series: ISCARMILL
- Single or Double Sided Insert: Single
- Standards: ANSI; ISO 13399
- Thickness (Decimal Inch - 4 Decimals): 0.1250
- Thickness (Inch): 1/8
- Thickness Range (Decimal Inch): 0.1250 to 0.1500
- Width (Decimal Inch - 4 Decimals): 0.5000
- Width (Inch): 1/2
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: IL, Israel
- TAA Compliant: Yes
- UNSPSC: 23291601
- CA Restricted (Prop 65): Unknown
- Prohibited States: AK,HI,PR
Product info last updated on July 16, 2024 12:02pm UTC
Category: Milling Inserts and Tip Inserts