12" x 36" Engine Lathe: Frequency, 2 hp, 230 V MPN:892320
12" x 36" Engine Lathe: Frequency, 2 hp, 230 V
12" x 36" Engine Lathe: Frequency, 2 hp, 230 V 1 Phase, 1-9/16" Spindle Bore Dia, 40 to 2,000 RPM
Product Information
- : 892320
- Bed Width: 7.5in
- Bed Width (Inch): 7-1/2
- Cross Slide Travel: 6.75in
- Cross Slide Travel (Decimal Inch): 6.7500
- Cross Slide Travel (Inch): 6-3/4
- Distance Between Centers: 36in
- Distance Between Centers (Inch): 36
- Gap Length: 9.5in
- Gap Length (Decimal Inch): 9.5000
- Max. Cross Feed Rate Per Revolution (Decimal Inch): 0.1500
- Max. Longitudinal Feed Per Rev. (Decimal Inch): 0.0460
- Maximum Cross Feed Rate Per Revolution: 0.15in
- Maximum Longitudinal Feed Per Revolution: 0.046in
- Maximum Spindle Speed: 2000
- Maximum Threads Per Inch: 56
- Min. Cross Feed Rate Per Revolution (Decimal Inch): 0.050000
- Min. Longitudinal Feed Per Rev. (Decimal Inch): 0.0160
- Minimum Cross Feed Rate Per Revolution: 0.05in
- Minimum Metric Pitch: 2in
- Minimum Metric Pitch (Decimal Inch): 2.0000
- Minimum Spindle Speed: 40
- Number of Inch Threads: 25
- Overall Depth: 30in
- Overall Depth (Inch): 30
- Overall Height: 60in
- Overall Length (Inch): 71
- Phase: Single
- Spindle Bore Diameter (Inch): 1-9/16
- Spindle Nose Designation: D1-4
- Spindle Speed Control: Frequency
- Spindle Taper Size: 5MT
- Spindle Taper Size (Sleeve): 5MT
- Swing: 12in
- Swing (Inch): 12
- Swing Over Cross Slide (Decimal Inch): 7.3125
- Swing Over Gap: 17.5in
- Swing Over Gap (Decimal Inch): 17.5000
- Swing Over Gap (Inch): 17-1/2
- Tailstock Taper Size: 3MT
- Tailstock Travel: 4in
- Tailstock Travel (Decimal Inch): 4.0000
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: TW, Taiwan
- TAA Compliant: Yes
- UNSPSC: 23242300
- CA Restricted (Prop 65): Unknown
- Package Length: 71.00
- Package Width: 30.00
- Package Height: 60.00
- Package Weight: 1212.00
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 3:07am UTC
Category: Bench, Engine and Toolroom Lathes