14" x 40" Engine Lathe: Geared Head, 230/460 V MPN:321507
14" x 40" Engine Lathe: Geared Head, 230/460 V
14" x 40" Engine Lathe: Geared Head, 230/460 V 3 Phase, 3-1/8" Spindle Bore Dia, 42 to 1,800 RPM
Product Information
- : 321507
- Bed Width: 14in; 14.0in
- Bed Width (Inch): 14
- Cross Slide Travel: 9.0in
- Cross Slide Travel (Decimal Inch): 9.0000
- Cross Slide Travel (Inch): 9
- Distance Between Centers: 40in
- Distance Between Centers (Inch): 40
- Gap Length: 12.25in
- Gap Length (Decimal Inch): 12.2500
- Max. Cross Feed Rate Per Revolution (Decimal Inch): 0.0365
- Max. Longitudinal Feed Per Rev. (Decimal Inch): 0.0913
- Maximum Cross Feed Rate Per Revolution: 0.0365in
- Maximum Longitudinal Feed Per Revolution: 0.0913in
- Maximum Spindle Speed: 1800
- Maximum Threads Per Inch: 72
- Min. Cross Feed Rate Per Revolution (Decimal Inch): 0.000600
- Min. Longitudinal Feed Per Rev. (Decimal Inch): 0.0015
- Minimum Cross Feed Rate Per Revolution: 0.0006in
- Minimum Metric Pitch: 0.05in
- Minimum Metric Pitch (Decimal Inch): 0.0500
- Minimum Spindle Speed: 42
- Number of Inch Threads: 61
- Overall Depth: 40in; 40.0in
- Overall Depth (Inch): 40
- Overall Height: 47in; 47.0000in
- Overall Length (Inch): 97-1/2
- Phase: Three
- Spindle Bore Diameter (Inch): 3-1/8
- Spindle Nose Designation: D1-8
- Spindle Speed Control: Geared Head
- Spindle Taper Size: 7MT
- Spindle Taper Size (Sleeve): 5MT
- Swing: 14in
- Swing (Inch): 14
- Swing Over Cross Slide (Decimal Inch): 7.6250
- Swing Over Cross Slide (Inch): 7-5/8
- Swing Over Gap: 23.63in
- Swing Over Gap (Decimal Inch): 23.6300
- Tailstock Taper Size: 4MT
- Tailstock Travel: 5.0in
- Tailstock Travel (Decimal Inch): 5.0000
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: CN, China
- TAA Compliant: No
- UNSPSC: 23242300
- CA Restricted (Prop 65): Unknown
- Package Weight: 5700.00
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 5:15am UTC
Category: Bench, Engine and Toolroom Lathes