Turning Insert: WNMG432RN KCP10B, Solid Carbide - TiCN, Al2O3 & TiOCN Coated, 0.342" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80 ° MPN:5507612
Turning Insert: WNMG432RN KCP10B, Solid Carbide - TiCN, Al2O3 & TiOCN Coated, 0.342" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80 ° MPN:5507612 is available to buy in increments of 5
Turning Insert: WNMG432RN KCP10B, Solid Carbide - TiCN, Al2O3 & TiOCN Coated, 0.342" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80 ° Trigon, Series KENLOC
Turning Insert: WNMG432RN KCP10B, Solid Carbide - TiCN, Al2O3 & TiOCN Coated, 0.342" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80 degree Trigon, Series KENLOC TiCN, Al2O3 & TiOCN Coated, 0.342" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80 degree Trigon, Series KENLOC
Product Information
- : 5507612
- Chip Breaker: G
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; Al2O3; TiOCN
- Corner Radius (Decimal Inch): 0.0313
- Corner Radius (Inch): 1/32
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.3420
- Insert Material: Solid Carbide
- Insert Shape: Trigon
- Insert Shape Code: W
- Insert Size Code: 432
- Insert Style: WNMG
- Insert Thickness (Decimal Inch): 0.1875
- Insert Thickness (Inch): 3/16
- Iso Code: WNMG080408RN
- Manufacturer Grade: KCP10B
- Maximum Depth of Cut (Decimal Inch): 0.2500
- Maximum Depth of Cut (mm): 6.35
- Primary Workpiece Material: P
- Rake: Neutral
- Relief Angle: 0
- Secondary Workpiece Material: None
- Series: KENLOC
- Tolerance Code: M
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.54
- Package Width: 0.79
- Package Height: 0.39
- Package Weight: 0.02
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts