Turning Insert: DNMG431FF KC5010, Solid Carbide MPN:1612562
Turning Insert: DNMG431FF KC5010, Solid Carbide MPN:1612562 is available to buy in increments of 5
Turning Insert: DNMG431FF KC5010, Solid Carbide
Turning Insert: DNMG431FF KC5010, Solid Carbide TiAlN Coated, Neutral, 15.5 mm Long, 1/2" Inscribed Circle, 1/64" Corner Radius, 55 degree Diamond, Series KENLOC
Product Information
- : 1612562
- Chip Breaker: G
- Clearance Code: N
- Coating Process: PVD
- Coating/Finish: TiAlN
- Corner Radius (Decimal Inch): 0.0156
- Corner Radius (Inch): 1/64
- Hole Diameter (Decimal Inch): 0.2031
- Hole Diameter (Mm) ( - 0 Decimals): 5.16
- Included Angle: 55.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.6102
- Insert Length (mm): 15.50
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: D
- Insert Size Code: 431
- Insert Style: DNMG
- Insert Thickness (Decimal Inch): 0.1875
- Insert Thickness (Inch): 3/16
- Length Range (Decimal Inch): 0.6000 - 0.6500
- Manufacturer Grade: KC5010
- Material Grade: C3; C4
- Maximum Depth of Cut (Decimal Inch): 0.0492
- Maximum Depth of Cut (mm): 1.25
- Primary Workpiece Material: M
- Rake: Positive
- Rake Angle: 20
- Relief Angle: 0
- Secondary Workpiece Material: N; P; S
- Series: KENLOC
- Style: DNMG431
- Tolerance Code: M
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: Yes
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Weight: 0.03
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 6:43am UTC
Category: Turning and Profiling Inserts