Morse® Hand Drum Pump 28-5BV for Chlorinated Solvents Acids Xylene up to 2000 SSU Viscosity 28-5BV
Discount: See in Cart
Free Shipping
In Stock
Free Shipping
In Stock
SKU
281-6426B80
Morse® Hand Drum Pump 28-5BV for Chlorinated Solvents, Acids, Xylene up to 2000 SSU Viscosity 28-5BV
This item is NOT returnable.
Morse® Hand Drum Hand Pump
General Guide: Some Chlorinated Solvents, Acids, Aromatics, Xylene up to 2000 SSU
Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels.
General Guide: Some Chlorinated Solvents, Acids, Aromatics, Xylene up to 2000 SSU
Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels.
- Suction lift tested for 15 feet (4.6 m) minimum
- Discharge head up to 25 feet (7.3 m)
- Output head pressure is up to 10.83 psi
- 1" (2.54 cm) NPT suction tube
- 3/4" (1.9 cm) NPT discharge tube
- Two position drum pump handle
- Handle can be mounted above the drum hand pump extending 20.5" (52 cm) above the bung when upright.
- Mount handle below the drum hand pump for easier operation from below with the drum on a truck or platform.
- Self-lubricating Polytetrafluoroethylene piston ring operates wet or dry for long life
- Chemically compatible with liquids up to 120° F (49° C)
- Handles viscosity up to 2,000 SSU (about as thick as 30 weight motor oil at room temperature). Handle effort increases as viscosity approaches this maximum.
- This Morse Model 28-5BV drum / barrel pump is generally useful with compatible liquids in a mild acidity/alkalinity range wider than pH 4 to 9. Avoid stronger acids and caustics.
Product Specifications
- BRANDMorse
- COMPATIBLE LIQUIDSSome Chlorinated Solvents; Acids; Aromatics, Xylene
- CONSTRUCTIONRyton
- DISCHARGE SPOUT DIAMETER INCHES3/4" Cross Linked Polyethylene
- DISPENSING RATE1 Qt. per Stroke
- GASKET MATERIALViton
- MANUFACTURERS PART NUMBER28-5BV
- SEAL CONSTRUCTIONViton
- STYLEFits 30 & 55 Gal. Drums
- SUCTION TUBE DIMENSION INCHES1 Polytetrafluoroethylene
- TEMPERATURE RANGE °F120
- THREAD INCHES2 NPT
- TYPEDrum Hand Pump
- WEIGHT LBS12
- WETTED MATERIALSRyton & Viton
Additional Information
- UNSPSC: 40151529
- Brand: Morse Mfg Co., Inc.
- Package Quantity: 1
- Country of Origin: US
- FOB Origin: NY
- Ships by: PARCEL
- Comes in a kit: No
- Newly added to catalog: No
- Item is on Clearance: No
- Contains Hazardous Materials: No
- CA Proposition 65 Applies: Yes
- Package Length: 21.00
- Package Width: 9.00
- Package Height: 9.00
- Package Weight: 12.00
Product info last updated on November 7, 2024 11:51am UTC
Category: Drum Handling Equipment