Turning Insert: DNMG332-QM 235, Solid Carbide MPN:5731398
Turning Insert: DNMG332-QM 235, Solid Carbide MPN:5731398 is available to buy in increments of 10
Turning Insert: DNMG332-QM 235, Solid Carbide
Turning Insert: DNMG332-QM 235, Solid Carbide TiCN & TiN Coated, Neutral, 3/8" Inscribed Circle, 1/32" Corner Radius, 55 degree Diamond, Series T-Max P
Product Information
- : 5731398
- Chip Breaker: G
- Clearance Code: N
- Coating Process: CVD
- Coating/Finish: TiCN; TiN
- Corner Radius (Decimal Inch): 0.0313
- Corner Radius (Inch): 1/32
- Corner Radius (mm): 0.79
- Cutting Direction: Neutral
- Cutting Edge Style: Rounded
- Hole Diameter (Decimal Inch): 0.1500
- Hole Diameter (Mm) ( - 0 Decimals): 3.81
- Included Angle: 55.0
- Inscribed Circle (Decimal Inch): 0.3750
- Inscribed Circle (Inch): 3/8
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: D
- Insert Size Code: 332
- Insert Style: DNMG
- Insert Thickness: 4.76
- Insert Thickness (Decimal Inch): 0.1875
- Insert Thickness (Inch): 3/16
- Iso Code: DNMG 11 04 08-QM 235
- Manufacturer Grade: 235
- Maximum Depth of Cut (mm): 10.83
- Relief Angle: 0
- Series: T-Max P
- Tolerance Code: M
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.54
- Package Height: 0.43
- Package Weight: 0.17
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts