Turning Insert: CNMG431LC 1515, Solid Carbide MPN:5724349
Turning Insert: CNMG431LC 1515, Solid Carbide MPN:5724349 is available to buy in increments of 10
Turning Insert: CNMG431LC 1515, Solid Carbide
Turning Insert: CNMG431LC 1515, Solid Carbide TiCN, Al2O3 & TiN Coated, Neutral, 12.9 mm Long, 1/2" Inscribed Circle, 1/64" Corner Radius, 80 degree Diamond, Series T-Max P
Product Information
- : 5724349
- Ansi Code: CNMG431LC1515
- Chip Breaker: LC
- Clearance Code: N
- Coating Process: MTCVD
- Coating/Finish: TiCN; Al2O3; TiN
- Corner Radius (Decimal Inch): 0.0157
- Corner Radius (Inch): 1/64
- Corner Radius (mm): 0.40
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.2032
- Hole Diameter (Mm) ( - 0 Decimals): 5.16
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Inscribed Circle (mm): 12.70
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.5079
- Insert Length (mm): 12.90
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: C
- Insert Size Code: 431
- Insert Style: CNMG
- Insert Thickness: 4.76
- Insert Thickness (Inch): 3/16
- Iso Code: CNMG120404LC1515
- Length Range (Decimal Inch): 0.5000 - 0.6000
- Manufacturer Grade: 1515
- Manufacturers Catalog Number: 5724349
- Maximum Depth of Cut (Decimal Inch): 0.4921
- Maximum Depth of Cut (mm): 12.50
- Number of Cutting Edges: 4
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Relief Angle: 0
- Secondary Workpiece Material: Stainless Steel
- Secondary Workpiece Material Code: M
- Series: T-Max P
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.54
- Package Height: 0.43
- Package Weight: 0.30
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts