Turning Insert: VNMG331SF H13A, Solid Carbide MPN:5891434
Turning Insert: VNMG331SF H13A, Solid Carbide MPN:5891434 is available to buy in increments of 10
Turning Insert: VNMG331SF H13A, Solid Carbide
Turning Insert: VNMG331SF H13A, Solid Carbide Uncoated, Neutral, 16.61 mm Long, 3/8" Inscribed Circle, 1/64" Corner Radius, 35 degree Diamond, Series T-Max P
Product Information
- : 5891434
- Ansi Code: VNMG331SFH13A
- Chip Breaker: SF
- Clearance Code: N
- Coating/Finish: Bright/Uncoated
- Corner Radius (Decimal Inch): 0.0157
- Corner Radius (Inch): 1/64
- Corner Radius (mm): 0.40
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.1500
- Hole Diameter (Mm) ( - 0 Decimals): 3.81
- Included Angle: 35.0
- Inscribed Circle (Decimal Inch): 0.3750
- Inscribed Circle (Inch): 3/8
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.6539
- Insert Length (mm): 16.61
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: V
- Insert Size Code: 331
- Insert Style: VNMG
- Insert Thickness: 4.76
- Insert Thickness (Inch): 3/16
- Iso Code: VNMG160404SFH13A
- Length Range (Decimal Inch): 0.6500 - 0.7000
- Manufacturer Grade: H13A
- Manufacturers Catalog Number: 5891434
- Maximum Depth of Cut (Decimal Inch): 0.0945
- Maximum Depth of Cut (mm): 2.40
- Number of Cutting Edges: 4
- Primary Workpiece Material: Stainless Steel
- Primary Workpiece Material Code: M
- Relief Angle: 0
- Secondary Workpiece Material: Super-alloys & Titanium
- Secondary Workpiece Material Code: S
- Series: T-Max P
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 5.08
- Package Width: 2.13
- Package Height: 0.53
- Package Weight: 0.30
- Prohibited States: AK,HI,PR
Product info last updated on November 4, 2024 12:00pm UTC
Category: Turning and Profiling Inserts