Turning Insert: TNMG431MF 5015, Cermet MPN:5754160
Turning Insert: TNMG431MF 5015, Cermet MPN:5754160 is available to buy in increments of 10
Turning Insert: TNMG431MF 5015, Cermet
Turning Insert: TNMG431MF 5015, Cermet Uncoated, Neutral, 22 mm Long, 1/2" Inscribed Circle, 1/64" Corner Radius, 60 degree Triangle, Series T-Max P
Product Information
- : 5754160
- Ansi Code: TNMG431MF5015
- Chip Breaker: MF
- Clearance Code: N
- Coating Process: Uncoated
- Coating/Finish: Uncoated
- Corner Radius (Decimal Inch): 0.0157
- Corner Radius (Inch): 1/64
- Corner Radius (mm): 0.40
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.2032
- Hole Diameter (Mm) ( - 0 Decimals): 5.16
- Included Angle: 60.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Inscribed Circle (mm): 12.70
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.8661
- Insert Length (mm): 22.00
- Insert Material: Cermet
- Insert Shape: Triangle
- Insert Shape Code: T
- Insert Size Code: 431
- Insert Style: TNMG
- Insert Thickness: 4.76
- Insert Thickness (Inch): 3/16
- Iso Code: TNMG 22 04 04-MF 5015
- Length Range (Decimal Inch): 0.7000 - 10.0000
- Manufacturer Grade: 5015
- Manufacturers Catalog Number: 5754160
- Maximum Depth of Cut (Decimal Inch): 0.8504
- Maximum Depth of Cut (mm): 21.60
- Number of Cutting Edges: 6
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Relief Angle: 0
- Secondary Workpiece Material: Cast Iron
- Secondary Workpiece Material Code: K
- Series: T-Max P
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 5.08
- Package Width: 2.13
- Package Height: 0.53
- Package Weight: 0.19
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts