Turning Insert: SNMG544SMR 1105, Solid Carbide MPN:5909069
Turning Insert: SNMG544SMR 1105, Solid Carbide MPN:5909069 is available to buy in increments of 10
Turning Insert: SNMG544SMR 1105, Solid Carbide
Turning Insert: SNMG544SMR 1105, Solid Carbide TiAlN2 Coated, Neutral, 1/2" Inscribed Circle, 1/16" Corner Radius, 90 degree Square, Series T-Max P
Product Information
- : 5909069
- Ansi Code: SNMG544SMR1105
- Chip Breaker: SMR
- Clearance Code: N
- Coating Process: PVD
- Coating/Finish: TiAlN2
- Corner Radius (Decimal Inch): 0.0630
- Corner Radius (Inch): 1/16
- Corner Radius (mm): 1.60
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.2500
- Hole Diameter (Mm) ( - 0 Decimals): 6.35
- Included Angle: 90.0
- Inscribed Circle (Decimal Inch): 0.6250
- Inscribed Circle (Inch): 1/2
- Inscribed Circle (mm): 12.70
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Material: Solid Carbide
- Insert Shape: Square
- Insert Shape Code: S
- Insert Size Code: 544
- Insert Style: SNMG
- Insert Thickness: 6.35
- Insert Thickness (Decimal Inch): 0.2500
- Insert Thickness (Inch): 1/4
- Iso Code: SNMG150616SMR1105
- Manufacturer Grade: 1105
- Manufacturers Catalog Number: 5909069
- Maximum Depth of Cut (Decimal Inch): 0.4173
- Maximum Depth of Cut (mm): 10.60
- Number of Cutting Edges: 8
- Primary Workpiece Material: Stainless Steel
- Primary Workpiece Material Code: M
- Relief Angle: 0
- Secondary Workpiece Material: Super-alloys & Titanium
- Secondary Workpiece Material Code: S
- Series: T-Max P
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 5.08
- Package Width: 2.13
- Package Height: 0.53
- Package Weight: 0.50
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts