Turning Insert: VBGW332S0320F 7025, Cubic Boron Nitride MPN:5755391
Turning Insert: VBGW332S0320F 7025, Cubic Boron Nitride MPN:5755391 is available to buy in increments of 5
Turning Insert: VBGW332S0320F 7025, Cubic Boron Nitride
Turning Insert: VBGW332S0320F 7025, Cubic Boron Nitride Uncoated, Neutral, 16.61 mm Long, 3/8" Inscribed Circle, 1/32" Corner Radius, 35 degree Diamond, Series CoroTurn 107
Product Information
- : 5755391
- Ansi Code: VBGW332S0320F7025
- Chip Breaker: W
- Clearance Code: B
- Coating Process: Uncoated
- Coating/Finish: Bright/Uncoated
- Corner Radius (Decimal Inch): 0.0315
- Corner Radius (Inch): 1/32
- Corner Radius (mm): 0.80
- Cutting Direction: Neutral
- Cutting Edge Style: ER Treated; Negative Land
- Hole Diameter (Decimal Inch): 0.1732
- Hole Diameter (Mm) ( - 0 Decimals): 4.40
- Included Angle: 35.0
- Inscribed Circle (Decimal Inch): 0.3750
- Inscribed Circle (Inch): 3/8
- Insert Hand: Neutral
- Insert Holding Method: Screw
- Insert Length (Decimal Inch): 0.6539
- Insert Length (mm): 16.61
- Insert Material: Cubic Boron Nitride
- Insert Shape: Diamond
- Insert Shape Code: V
- Insert Size Code: 332
- Insert Style: VBGW
- Insert Thickness: 4.76
- Insert Thickness (Inch): 3/16
- Iso Code: VBGW160408S01020F 7025
- Length Range (Decimal Inch): 0.6500 - 0.7000
- Manufacturer Grade: 7025
- Manufacturers Catalog Number: 5755391
- Maximum Depth of Cut (Decimal Inch): 0.1181
- Maximum Depth of Cut (mm): 3.00
- Number of Cutting Edges: 2
- Primary Workpiece Material: Hard Material
- Primary Workpiece Material Code: H
- Relief Angle: 5
- Series: CoroTurn 107
- Tolerance Code: G
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: PL, Poland
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.58
- Package Height: 0.53
- Package Weight: 0.14
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts