Turning Insert: VBMT221PF 1525, Cermet MPN:5755607
Turning Insert: VBMT221PF 1525, Cermet MPN:5755607 is available to buy in increments of 10
Turning Insert: VBMT221PF 1525, Cermet
Turning Insert: VBMT221PF 1525, Cermet TiCN & TiN Coated, Neutral, 11.07 mm Long, 1/4" Inscribed Circle, 1/64" Corner Radius, 35 degree Diamond, Series CoroTurn 107
Product Information
- : 5755607
- Ansi Code: VBMT221PF1525
- Chip Breaker: PF
- Clearance Code: B
- Coating Process: PVD
- Coating/Finish: TiCN; TiN
- Corner Radius (Decimal Inch): 0.0157
- Corner Radius (Inch): 1/64
- Corner Radius (mm): 0.40
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.1102
- Hole Diameter (Mm) ( - 0 Decimals): 2.80
- Included Angle: 35.0
- Inscribed Circle (Decimal Inch): 0.2500
- Inscribed Circle (Inch): 1/4
- Insert Hand: Neutral
- Insert Holding Method: Screw
- Insert Length (Decimal Inch): 0.4358
- Insert Length (mm): 11.07
- Insert Material: Cermet
- Insert Shape: Diamond
- Insert Shape Code: V
- Insert Size Code: 221
- Insert Style: VBMT
- Insert Thickness: 3.18
- Insert Thickness (Decimal Inch): 0.1252
- Insert Thickness (Inch): 1/8
- Iso Code: VBMT 11 03 04-PF 1525
- Length Range (Decimal Inch): 0.4000 - 0.5000
- Manufacturer Grade: 1525
- Manufacturers Catalog Number: 5755607
- Maximum Depth of Cut (Decimal Inch): 0.4201
- Maximum Depth of Cut (mm): 10.67
- Number of Cutting Edges: 2
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Relief Angle: 5
- Secondary Workpiece Material: Stainless Steel; Cast Iron
- Secondary Workpiece Material Code: K; M
- Series: CoroTurn 107
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.54
- Package Height: 0.43
- Package Weight: 0.10
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts