Turning Insert: CCMT32.51-PM 4305, Solid Carbide MPN:6709530
Turning Insert: CCMT32.51-PM 4305, Solid Carbide MPN:6709530 is available to buy in increments of 1
Turning Insert: CCMT32.51-PM 4305, Solid Carbide
Turning Insert: CCMT32.51-PM 4305, Solid Carbide TiCN, Al2O3 & TiN Coated, Neutral, 9.67 mm Long, 3/8" Inscribed Circle, 1/64" Corner Radius, 80 degree Diamond, Series CoroTurn 107
Product Information
- : 6709530
- Ansi Code: CCMT3(2.5)1PM4305
- Chip Breaker: PM
- Clearance Code: C
- Coating Process: MTCVD
- Coating/Finish: TiCN; Al2O3; TiN
- Corner Radius (Decimal Inch): 0.0157
- Corner Radius (Inch): 1/64
- Corner Radius (mm): 0.40
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.1732
- Hole Diameter (Mm) ( - 0 Decimals): 4.40
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.3750
- Inscribed Circle (Inch): 3/8
- Insert Hand: Neutral
- Insert Holding Method: Screw
- Insert Length (Decimal Inch): 0.3650
- Insert Length (mm): 9.67
- Insert Material: Solid Carbide
- Insert Shape: Diamond
- Insert Shape Code: C
- Insert Size Code: 32.51
- Insert Style: CCMT
- Insert Thickness: 3.97
- Insert Thickness (Decimal Inch): 0.1563
- Insert Thickness (Inch): 5/32
- Iso Code: CCMT09T304PM4305
- Length Range (Decimal Inch): 0.3000 - 0.4000
- Manufacturer Grade: 4305
- Manufacturers Catalog Number: 6709530
- Maximum Depth of Cut (Decimal Inch): 0.3650
- Maximum Depth of Cut (mm): 9.27
- Number of Cutting Edges: 2
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Relief Angle: 7
- Secondary Workpiece Material: Cast Iron
- Secondary Workpiece Material Code: K
- Series: CoroTurn 107
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.54
- Package Height: 0.43
- Package Weight: 0.20
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts