Turning Insert: WNMG432SM 1125, Solid Carbide MPN:5915128
Turning Insert: WNMG432SM 1125, Solid Carbide MPN:5915128 is available to buy in increments of 10
Turning Insert: WNMG432SM 1125, Solid Carbide
Turning Insert: WNMG432SM 1125, Solid Carbide TiAlN & AlCr2O3 Coated, Neutral, 8.69 mm Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80 degree Trigon, Series T-Max P
Product Information
- : 5915128
- Ansi Code: WNMG432SM1125
- Chip Breaker: SM
- Clearance Code: N
- Coating Process: PVD
- Coating/Finish: TiAlN; AlCr2O3
- Corner Radius (Decimal Inch): 0.0315
- Corner Radius (Inch): 1/32
- Corner Radius (mm): 0.80
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.2032
- Hole Diameter (Mm) ( - 0 Decimals): 5.16
- Included Angle: 80.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.3421
- Insert Length (mm): 8.69
- Insert Material: Solid Carbide
- Insert Shape: Trigon
- Insert Shape Code: W
- Insert Size Code: 432
- Insert Style: WNMG
- Insert Thickness: 4.76
- Insert Thickness (Inch): 3/16
- Iso Code: WNMG 08 04 08-SM 1125
- Length Range (Decimal Inch): 0.3000 - 0.4000
- Manufacturer Grade: 1125
- Manufacturers Catalog Number: 5915128
- Maximum Depth of Cut (Decimal Inch): 0.1260
- Maximum Depth of Cut (mm): 3.20
- Number of Cutting Edges: 6
- Primary Workpiece Material: Stainless Steel
- Primary Workpiece Material Code: M
- Relief Angle: 0
- Secondary Workpiece Material: Super-alloys & Titanium
- Secondary Workpiece Material Code: S
- Series: T-Max P
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.54
- Package Height: 0.43
- Package Weight: 0.23
- Prohibited States: AK,HI,PR
Product info last updated on October 31, 2024 12:03pm UTC
Category: Turning and Profiling Inserts