Turning Insert: DNMG441MF 5015, Cermet MPN:5731927
Turning Insert: DNMG441MF 5015, Cermet MPN:5731927 is available to buy in increments of 10
Turning Insert: DNMG441MF 5015, Cermet
Turning Insert: DNMG441MF 5015, Cermet Uncoated, Neutral, 15.5 mm Long, 1/2" Inscribed Circle, 1/64" Corner Radius, 55 degree Diamond, Series T-Max P
Product Information
- : 5731927
- Ansi Code: DNMG441MF5015
- Chip Breaker: MF
- Clearance Code: N
- Coating Process: Uncoated
- Coating/Finish: Uncoated
- Corner Radius (Decimal Inch): 0.0157
- Corner Radius (Inch): 1/64
- Corner Radius (mm): 0.40
- Cutting Direction: Neutral
- Hole Diameter (Decimal Inch): 0.2032
- Hole Diameter (Mm) ( - 0 Decimals): 5.16
- Included Angle: 55.0
- Inscribed Circle (Decimal Inch): 0.5000
- Inscribed Circle (Inch): 1/2
- Inscribed Circle (mm): 12.70
- Insert Hand: Neutral
- Insert Holding Method: Clamp; Pin
- Insert Length (Decimal Inch): 0.6102
- Insert Length (mm): 15.50
- Insert Material: Cermet
- Insert Shape: Diamond
- Insert Shape Code: D
- Insert Size Code: 441
- Insert Style: DNMG
- Insert Thickness: 6.35
- Insert Thickness (Decimal Inch): 0.2500
- Insert Thickness (Inch): 1/4
- Iso Code: DNMG 15 06 04-MF 5015
- Length Range (Decimal Inch): 0.6000 - 0.6500
- Manufacturer Grade: 5015
- Manufacturers Catalog Number: 5731927
- Maximum Depth of Cut (Decimal Inch): 0.5945
- Maximum Depth of Cut (mm): 15.10
- Number of Cutting Edges: 4
- Primary Workpiece Material: Steel
- Primary Workpiece Material Code: P
- Relief Angle: 0
- Secondary Workpiece Material: Cast Iron
- Secondary Workpiece Material Code: K
- Series: T-Max P
- Tolerance Code: M
- Wiper Edge: No
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: Coo Data Unavail
- TAA Compliant: No
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Length: 5.08
- Package Width: 2.13
- Package Height: 0.53
- Package Weight: 0.22
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 1:05am UTC
Category: Turning and Profiling Inserts