Milling Insert: L331.1A-14 50 63H-WL 1040, 1040, Solid Carbide MPN:5907129
Milling Insert: L331.1A-14 50 63H-WL 1040, 1040, Solid Carbide MPN:5907129 is available to buy in increments of 10
Milling Insert: L331.1A-14 50 63H-WL 1040, 1040, Solid Carbide
Milling Insert: L331.1A-14 50 63H-WL 1040, 1040, Solid Carbide TiAlN2 Coated, 4.95 mm Thick, 11.5 mm Wide
Product Information
- : 5907129
- Chip Breaker: WL
- Coating Process: PVD
- Coating/Finish: TiAlN2
- Corner Radius (Decimal Inch): 0.2480
- Corner Radius (mm): 6.30
- Cutting Edge Style: Sharp
- Hole Diameter (Decimal Inch): 0.1811
- Hole Diameter (Mm) ( - 0 Decimals): 4.60
- Included Angle Degree: 90
- Inscribed Circle (Decimal Inch): 0.5512
- Inscribed Circle (mm): 14.00
- Inscribed Circle Range (Decimal Inch): 0.5100 to 0.6000
- Insert Hand: Left Hand
- Insert Material: Carbide
- Insert Shape: Rectangle
- Insert Size: 145063
- Insert Style: L331.1A
- Iso Code: L331.1A-14 50 63H-WL 1040
- Manufacturer Grade: 1040
- Manufacturers Catalog Number: 5907129
- Maximum Depth of Cut (Decimal Inch): 0.5394
- Maximum Depth of Cut (mm): 13.70
- Relief Angle: 0
- Thickness (Decimal Inch - 4 Decimals): 0.1949
- Thickness (mm): 4.95
- Thickness Range (Decimal Inch): 0.1850 to 0.2000
- Width (Decimal Inch - 4 Decimals): 0.4528
- Width (Mm - 2 Decimals): 11.50
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: SE, Sweden
- TAA Compliant: Yes
- UNSPSC: 23291601
- CA Restricted (Prop 65): Unknown
- Package Length: 3.74
- Package Width: 1.54
- Package Height: 0.43
- Package Weight: 0.20
- Prohibited States: AK,HI,PR
Product info last updated on July 1, 2024 12:39am UTC
Category: Milling Inserts and Tip Inserts