13" x 40" Engine Lathe: Geared Head, 3 hp, 220 V MPN:TRA026-1PH
13" x 40" Engine Lathe: Geared Head, 3 hp, 220 V
13" x 40" Engine Lathe: Geared Head, 3 hp, 220 V 1 Phase, 1.3700" Spindle Bore Dia, 105 to 2,000 RPM
Product Information
- : TRA026-1PH
- Bed Width: 7.3in; 7.3000in
- Bed Width (Inch): 7.3000
- Cross Slide Travel: 5.7in; 5.7000in
- Cross Slide Travel (Decimal Inch): 5.7000
- Distance Between Centers: 40in
- Distance Between Centers (Inch): 40
- Gap Length: 6.0in
- Gap Length (Decimal Inch): 6.0000
- Max. Cross Feed Rate Per Revolution (Decimal Inch): 0.0136
- Max. Longitudinal Feed Per Rev. (Decimal Inch): 0.0410
- Maximum Cross Feed Rate Per Revolution: 145.0mm; 0.0136in
- Maximum Longitudinal Feed Per Revolution: 0.041in
- Maximum Spindle Speed: 2000
- Maximum Threads Per Inch: 144
- Min. Cross Feed Rate Per Revolution (Decimal Inch): 0.000020
- Min. Longitudinal Feed Per Rev. (Decimal Inch): 0.0008
- Minimum Cross Feed Rate Per Revolution: 0.00002in
- Minimum Metric Pitch: 0.2in
- Minimum Metric Pitch (Decimal Inch): 0.2000
- Minimum Spindle Speed: 105
- Number of Inch Threads: 47
- Overall Depth: 41.73in; 41.7300in
- Overall Height: 62.2in; 62.2000in
- Phase: Three
- Spindle Bore Diameter: 35.0mm; 1.3700in
- Spindle Bore Diameter (Inch): 1.3700
- Spindle Nose Designation: D1-5
- Spindle Speed Control: Geared Head
- Spindle Taper Size: 4MT
- Spindle Taper Size (Sleeve): 3MT
- Swing: 13in
- Swing (Inch): 13
- Swing Over Cross Slide (Decimal Inch): 7.5000
- Swing Over Cross Slide (Inch): 7-1/2
- Swing Over Gap: 20in; 20.0in
- Swing Over Gap (Decimal Inch): 20.0000
- Swing Over Gap (Inch): 20
- Tailstock Taper Size: 3MT
- Tailstock Travel: 100.0mm; 4.0in
- Tailstock Travel (Decimal Inch): 4.0000
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Country of Origin: TW, Taiwan
- TAA Compliant: Yes
- UNSPSC: 23242300
- CA Restricted (Prop 65): Unknown
- Package Length: 76.00
- Package Width: 34.00
- Package Height: 65.00
- Package Weight: 1584.00
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 3:47am UTC
Category: Bench, Engine and Toolroom Lathes