Motor 7 1/2 HP 1765 rpm 213T 208-230/460 MPN:00718XT3E213T
Motor 7 1/2 HP 1765 rpm 213T 208-230/460
Get precise measurements with Class ZZ Minus Plug & Pin Gage: 7.89 mm Dia designed for inspecting, detecting and testing instruments in various industries such as mechanical engineering, electronics engineering, and automotive. Featuring a miniature diameter gage that is easy to hold in one hand while measuring the pin location with the other, this high-quality plug and pin gage delivers accurate results on-the-go. Whether you're working on precision machinery or electronic components, Class ZZ Minus Plug & Pin Gage: 7.89 mm Dia is a must-have addition to your toolbox!
Class 1 C, D / 2 F, G three-phase hazardous location AC motors don't require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase hazardous location motors of the same HP, rpm, and frame size. These motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also used in areas where combustible dust such as carbon black, coke, charcoal, flour, starch, or grain dust is present.
Technical Specifications
- Item Hazardous Location Motor
- Motor Application Hazardous Location
- Phase Three
- Motor Design 3-Phase
- HP 7 1/2
- Nameplate RPM 1,765
- No. of Speeds 1
- Voltage 208-230/460V AC
- Full Load Amps 18.8/9.4
- Frame 213T
- Usable @ 208V Yes
- Usable @ 200V No
- Hz 60
- Max. Ambient Temp. 40 Degrees C
- Motor Service Factor 1.15
- Motor Thermal Protection T-Stat
- Ins. Class F
- Hazardous Location Class 1 C,D / 2 F,G
- Temp. Code T4
- Motor Enclosure Design Totally Enclosed Fan-Cooled
- Duty Cycle Continuous
- Motor Mounting Type Rigid Base
- NEMA Design B
- Motor Shaft Rotation CW/CCW
- Hazardous Location Division Division 1
- Motor Mounting Position Horizontal
- Length Less Shaft 14 9/16 in
- Motor Frame Material Cast Iron
- Shaft Dia. 1 3/8 in
- Shaft Length 3 3/8 in
- Motor Shaft Design Keyed
- Conduit Box Location Exterior
- Motor Bearings Ball
- Overall Length 19 7/16 in
- Weight 245 lb
- Motor Efficiency Group NEMA Premium Efficient
- Nominal Efficiency 91.7 %
- CC Number CC029A
- Standards CSA Certified (LR50962), UL Listed (E87848)
- Manufacturers Warranty Length 3 yr
- Green Environmental Attribute Product Contributes To Reducing Energy Consumption
- Green Certification or Other Recognition NEMA Premium(R) Rated
Manufacturer Details
- Manufacturer: Weg
- Condensed Mfg Number: 00718XT3E213T
- MPN: 00718XT3E213T
Label Details
- Hazardous Material: N
- Green Material Flag: Y
- Country of Origin: ZZ
- CA Prop 65 Wht Label: N
Classification Details
- Harmonization Code: 8501524000
- GDS Category Name: Hazardous Location Motors
- GDS Family Name: Definite Purpose AC Motors
- GDS Segment Name: Motors
- UNSPSC: 26101612
- UNSPSC Class ID: 16
- UNSPSC Commodity Name: Motors
- UNSPSC Commodity ID: 12
- UNSPSC Commodity Name: Multi phase motors
- UNSPSC Family ID: 10
- UNSPSC Family Name: Power sources
- UNSPSC Segment ID: 26
- UNSPSC Segment Name: Power Generation and Distribution Machinery and Accessories
Shipping Details
- Not For Sale In: HI AK PR
Product info last updated on April 3, 2024 10:14pm UTC
Category: Definite Purpose AC Motors