Grooving Inserts, Insert Style: NG-K , Insert Size Code: 3 , Cutting Width (Decimal Inch): 0.0472 , Cutting Width (mm): 1.200 , Insert Hand: Right Hand MPN:3607412
Grooving Inserts, Insert Style: NG-K , Insert Size Code: 3 , Cutting Width (Decimal Inch): 0.0472 , Cutting Width (mm): 1.200 , Insert Hand: Right Hand MPN:3607412 is available to buy in increments of 5
Grooving Inserts; Insert Style: NG-K ; Insert Size Code: 3 ; Cutting Width (Decimal Inch): 0.0472 ; Cutting Width (mm): 1.200 ; Insert Hand: Right Hand ; Maximum Depth of Cut (Decimal Inch): 0.0752
- Grooving Inserts
- Insert Style: NG-K
- Insert Size Code: 3
- Cutting Width (Decimal Inch): 0.0472
- Cutting Width (mm): 1.200
- Insert Hand: Right Hand
- Maximum Depth of Cut (Decimal Inch): 0.0752
Product Information
- : 3607412
- Ansi Code: NG3M120RK
- Chip Breaker: K
- Coating Classification: PVD
- Coating Process: PVD
- Coating/Finish: TiAlN
- Corner Radius (Decimal Inch): 0.0075
- Corner Radius (mm): 0.19
- Cutting Height (Decimal Inch): 0.0752
- Cutting Height (mm): 1.91
- Cutting Tool Application: Grooving; Turning
- Cutting Width (Decimal Inch): 0.0472
- Cutting Width (Inch): 3/64
- Cutting Width (mm): 1.200
- For Use With: Grooving; Turning
- Full Radius: No
- Gage Diameter (Decimal Inch): 0.3750
- Gage Diameter (Inch): 3/8
- Groove Width (mm): 1.20
- Hole Diameter (Decimal Inch): 0.0000
- Hole Diameter (Mm) ( - 0 Decimals): 0.0000
- Insert Hand: Right Hand
- Insert Height (Decimal Inch): 0.3441
- Insert Holding Method: Clamp
- Insert Material: Carbide
- Insert Seat Size: 3
- Insert Size: 3
- Insert Size Code: 3
- Insert Style: NG-K
- Insert Thickness: 8.74
- Insert Thickness (Decimal Inch): 0.3441
- Iso Code: NG3M120RK
- Lead Angle: 11.000
- Manufacturer Grade: TN6025
- Manufacturers Catalog Number: False
- Maximum Corner Radius (Decimal Inch): 0.0075
- Maximum Depth of Cut (Decimal Inch): 0.0752
- Maximum Depth of Cut (mm): 1.91
- Maximum Groove Width (mm): 1.20
- Minimum Corner Radius (Decimal Inch): 0.0100
- Minimum Groove Width (mm): 1.20
- Minimum Insert Width (mm): 4.98
- Multi-Use Tool: Yes
- Number of Cutting Edges: 2
- Overall Length (Decimal Inch): 0.8860
- Overall Length (mm): 22.5100
- Overall Width (Decimal Inch - 4 Decimals): 0.1960
- Overall Width (mm): 4.9800
- Primary Workpiece Material: Cast Iron; Stainless Steel; Super-alloys & Titanium; Steel
- Primary Workpiece Material Code: K; N; P; S
- Rake: Positive
- Rake Angle: 10.000
- Relief Angle: 11
- Secondary Workpiece Material: Non-Ferrous Metal
- Series: NG-K
- Single Or Double End: Single
- Style: Top Notch Grooving Insert
- Thickness (Inch): 11/32
- Type: Top Notch Grooving Insert
Additional Information
- Hazardous Materials: No, oK to Ship Via Air
- Material Safety Data Sheet (MSDS) Required: No
- Country of Origin: US, United States
- TAA Compliant: Yes
- UNSPSC: 23242105
- CA Restricted (Prop 65): Unknown
- Package Weight: 0.14
- Prohibited States: AK,HI,PR
Product info last updated on October 1, 2024 3:47am UTC
Category: Grooving Inserts